External S meter/SWR/Power meter for Yaesu FT857/FT897 +CAT Bluetooth adapter

Description

GoldFasion
External S meter/SWR/Power meter for Yaesu FT857/FT897 +CAT Bluetooth adapter
External Multifunction SWR sPower Meter for YAESU FT-857 and FT-897 only
with CAT Bluetooth adapter,
The default baud rate: 9600, Bluetooth connection password: 1234,
FT-857D,
FT-897D
external
display settings
header
methods:
* Receive
Display Settings
*
1
, press
[FUNC]
key to enter the
setup menu
, enable
the extended menu.
2
, rotate
[SELECT]
to call up the
setup menu
item
No-060 [MTR ARX SEL].
3
, rotate
[DIAL]
to select
an external
instrument
display:
-SIG:
the input
signal strength
display
-CTR: Discriminator Center Meter
-VLT:
battery voltage
-N / A:
blank
-FS:
buckle
in the instrument
1mA
full scale
output
signal calibration
standard
external
instruments
-OFF:
Turn off
the meter.
4
, press
[FUNC]
button to
save the settings and
exit the setup
menu.
*
Emission Display
Settings *
1
, press
[FUNC]
key to enter the
setup menu
, enable
the extended menu.
2
, rotate
[SELECT]
to call up the
setup menu
item
No-061 [MTR ATX SEL].
3
, rotate
[DIAL]
to select
an external
instrument
display:
-PWR:
transmit power
display
-ALC:
Automatic Level Control
voltage
display
-MOD:
Modulation
Level
Display
-SWR:
SWR
display
-VLT:
Display
Supply Voltage
-N / A:
blank
-OFF:
Turn off
the meter.
Calibration
method is as follows
1
, press
[FUNC]
key to enter the
setup menu
, enable
the extended menu.
2
, rotate
[SELECT]
to call up the
setup menu
item
No-060 [MTR ARX SEL].
3
, rotate
[DIAL]
to select
FS.
4
,
with a small
flathead screwdriver
to adjust the calibration
adjustment hole
rear
, so
the header
pointer to
full scale.
5
,
the calibration is complete
!
If you
can not find the
numbers
60, 61
menu
,
is
this
two
radio
hidden
menu
.
Long press
the F key
to open the menu
settings,
the 1st
menu
set to ON,
press the F key
to open the
exit
to save
the hidden menu