-40%
100K-1000MHz Field Strength Indicator Meter RF Signal Level Meter With Antenna
$ 10.45
- Description
- Size Guide
Description
elecbuyHome
Description
Payment
Shipping
Terms of sale
About Us
100K-1000MHz Field Strength Indicator Meter RF Signal Level Meter With Antenna
Product advantages:
1: The appearance is simple and efficient, beautiful and generous
2: Frequency bandwidth, high sensitivity, 100KHz-1000MHz (with antenna is 400-470Mz, please use different frequency antennas to test signals with different frequencies for better effect and sensitivity)
3: The pointer amplitude can be adjusted (to protect the meter)
4: Built-in automatic damping function, which is the buffer function, prevents the needle from swinging too fast and causing damage.
5: Small size, easy to carry, size: 90*115*70mm (excluding the raised antenna part)
6: Test sensitivity:
0.1w transmitter distance 0.1-1 meters
2W/5W transmitter, 1-3 meters range.
The 10W transmitter is in the range of 2-5 meters.
50W is about 3-10 meters.
With the HP8921A radio comprehensive tester, the sensitivity is -20dbm, and the -2dbm can be full. (The video rate is different and the sensitivity will be different)
Instructions for use:
Before use, please rotate the “amplitude adjustment” to the leftmost end. The length of the antenna to be pulled depends on the frequency of the test. It is better to have 1/4 wave as much as possible. The handheld walkie-talkie is about one meter away from the field strength meter. Don’t be too close! In order to avoid the signal is too strong to burn the field strength meter! Then press the walkie-talkie PTT button to make the walkie-talkie enter the launch state. At this time, the pointer of the field strength meter should have a signal indication. The stronger the signal, the greater the indication!
Amplitude adjustment:
If the field strength indicator indicates that the maximum range is exceeded, the “amplitude adjustment” can be adjusted to let the pointer indicate the appropriate position.
Method for testing the maximum gain point of an antenna
1. In order to change the frequency conveniently and quickly, you should use the keyboard to set the frequency walkie-talkie manually.
2. Link the walkie-talkie and antenna feeders, place the field strength meter near the antenna (depending on the environment), place it within the vertical radiation angle of the antenna as much as possible, and the antenna planning method is best.
3. Set the frequency of the walkie-talkie, press the launch button, observe the meter reading, and register the meter reading. Then set the walkie-talkie to other frequency points, let the walkie-talkie enter the launch state again, observe the meter reading... and then compare the readings of each frequency point! You can know the best frequency/segment of the antenna under test!
Package include:
1 x
100K-1000MHz Field Strength Indicator Meter RF Signal Level Meter With Antenna
Payment
We accept PayPal only.
Shipping
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
2.We only ship to ebay confirmed address. So before bidding, please kindly verify your ebay address.
3.
Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.
Less than , without free tracking number,if you request tracking number,please send ebay message to us.
Over ,with tracking number free.The shipping time depends on your location and local postal service,as well as the weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you didn't get your package.
4.Express shipping: Extra -- will be charged for the first 500 grams for most countries. Send ebay message to us if you need this service.
Terms of sale
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please send ebay message to us before you return it.
2.If item is defective in 30 days, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
3.If item is defective after 30 days, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.
About us
We are honest seller and do our best to serve you.
So if you have any concerns,please don’t hesitate to send ebay message to us.
On Sep-27-21 at 03:34:56 PDT, seller added the following information: